• 2017 Cyber Week
  • Rigol DSA800 Promotion
  • ABI Electronics
  • Teledyne LeCroy Free Products
  • Tekbox
  • Cambrionix
  • Teledyne LeCroy
  • Not Your Average Web Store
  • Rigol Mixed Signal Oscilloscopes at Saelig Company
  • Windfreak
  • GL Optic
  • Your Technical Distributor
  • Rigol Promotions
  • SDM3000
  • Choosing An Oscilloscope
  • Saelig Newsletter Signup
  • Free Shipping
  • Saelig Scope Selection
  • Saelig 29 Years in business!
  • Saelig Values
  • YouTube Videos
  • Saelig Name Origins
  • LD400
  • Saelig Custom Bundle


Dataman 40Pro IC Programmer

    Rate This Product

    Dataman 40Pro IC Programmer

    Manufacturer: Dataman

    Price: $595.00

     

    • Description
    • Downloads

     Note:  Adapter modules for the Dataman programmers are not returnable for refund or credit except where a unit is found to be defective and the seller is immediately contacted for replacement. 

    Universal 40-pin chip programmer with ISP capabilities and USB 2.0 connectivity. Dataman 40Pro is a small, fast and powerful programmer designed for a huge range of programmable devices.

    The 40Pro is built to meet the demands of development labs and field engineers for universal and portable programming. 

    General

    • 40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.
    • The programmer performs device insertion tests and contact checks before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error.
    • 40Pro programmer performs programming verifications at the marginal level of supply voltage, which improves programming yield, and guarantees long data retention.
    • Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF) and other packages.

    Base Unit (DAC)

    • Two D/A converters for VCCP and VPP, controllable rise and fall time
    • VCCP range 2V..7V/350mA
    • VPP range 2V..25V/200mA
    • USB 2.0/1.1 compatible interface
    • Auto calibration
    • Self test capability

    ZIF Socket

    • 40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
    • Pindriver: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver
    • FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins; level H selectable from 1.8V up to 5V
    • Continuity test: each pin is tested before every programming operation

    ISP Connector

    • 10-pin male type with miss insertion lock
    • 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
    • 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA)
    • Programmed chip voltage (VCCP) with both source/sink capability and voltage sense

    User Interface

    • 40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.
    • The programmer performs device insertion tests and contact checks before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error.
    • 40Pro programmer performs programming verifications at the marginal level of supply voltage, which improves programming yield, and guarantees long data retention.
    • Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF) and other packages.
    • Programmer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help. Selecting of the device is performed by class, manufacturer or simply by typing a fragment of vendor name and/or part number.
    • Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement).
    • All known data formats are supported. Automatic file format detection and conversion during loading of file.
    • The versatile auto-increment function allows each programmed device to be assigned an individual or incrementing serial number. This function also enables the operator to read serial numbers or device identification signatures from a file.
    • The software also provides extensive information about programmable devices including detailed drawings of all available packages. The software also provides explanations of chip labelling (prefixes and suffixes) for each of the supported chips.
    • The software provides full information for ISP implementation: Description of ISP connector pins for the currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.
    • Keeping your programmer software up to date can be a costly business with some programmers. Dataman offers completely FREE software updates whenever you need them. The latest software is always available from our website.

    Device Support

    The Dataman 40Pro supports over 30,000 of the most popular devices in use today - with future devices being added monthly. Dataman 40Pro coverage includes the following device types: ZIF socket

    • EPROM: NMOS/CMOS, 27xxx and 27Cxxx series, with 8/16 bit data width, full support of LV series
    • EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width, full support of LV series
    • Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, with 8/16 bit data width, full support of LV series
    • Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, full support for LV series
    • Configuration (EE)PROM: XCFxxx, 37LVxx, XC17xxxx, EPCxxx, AT17xxx, LV series including
    • NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
    • PLD: series: Atmel, AMD-Vantis, Cypress, ICT, Lattice, NS, ...
    • Microcontrollers 51 series: 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, LPC series from Atmel, Atmel W&M, Intel, Philips, SST, Winbond
    • Microcontrollers Atmel AVR: ATtiny, AT90Sxxx, ATmega series
    • Microcontrollers Cypress: CY8Cxxxxx
    • Microcontrollers ELAN: EM78Pxxx
    • Microcontrollers EM Microelectronic: 4 and 8 bit series
    • Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, dsPIC series, 8-40 pins
    • Microcontrollers Scenix (Ubicom): SXxxx series

    ISP Connector

    • Serial E(E)PROM: IIC series
    • Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series
    • Microcontrollers Cypress: CY8C2xxxx
    • Microcontrollers Elan: EM78Pxxx
    • Microcontrollers EM Microelectronic: 4 and 8 bit series
    • Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series
    • Microcontrollers Philips: LPC series

    This product replaces the Dataman PIKPro PICmicro ISP Programmer or the T51Pro MCS51.




    Free UPS Ground Shipping On Orders Over $99

    Sign up for our newsletter containing updates and exclusive content!


    Privacy Policy|Terms and Conditions|RoHs|Quality Statement|Returns|Sitemap

    © 2007- Saelig Company, Inc. All Rights Reserved.
    Other products, logos and company names mentioned herein, may be trademarks of their respective owners.
    eCommerce Shopping Cart Software by Miva Merchant