Note: Requires PC program Visulin for recording and displaying measurement data, and also for configuring the emulator.
The top model Emulin is an autonomous test and simulation device. Almost all test and control tasks on a LIN bus can be carried out with complete mobility. Primary fields of use are the developer's workplace, the test station, and the direct measurement in the vehicle. Above all, users appreciate the direct access to all timing parameters and signals during the measurement. This permits rapid error finding on site --without the bother of connecting to the PC.
Performance Characteristics:
- Emulation and Analysis of LIN nodes / LIN subsystems, simulation of bus participants not actually present
- Local monitoring of the bus traffic
- Local adjustment and measurement of all control parameters, message signals, frame timing
- Two independent configuration data sets, locally switchable
- Wakeup / Sleep / Power Down
- Event-based signal configuration and sequence control
- Detailed LIN bus error recognition and monitoring
- Simple integration into automated test environments (LabView, HP VEE, and others)
- Simulation of erroneous bus adjustment (stress, overload)
Equipment:
- Menu-based illuminated Display
- Operating panel with 8 keys and 12 LED's, freely configurable
- Port interface with 2 analog / digital inputs and outputs
- Frame-based trigger pulse creation via digital output
- Highly variable bus termination ranges (resistive + capacitive)
- High-speed CAN measurement bus for PC communication
Accessories:
- Secondary CAN interface for vehicle bus and gateway emulation, fully configurable
- Digital I/O module
- CAN I/O periphery extension
Emulin USB CAN Interface included.