Ikalogic SP209i 9-Ch Industrial 200 MSPS Logic Analyzer & Protocol Decoder

SP209 (Standard)	SP209i (Industrial)
9 logic channels supporting 1.8V, 2.5V, 3.3V and 5V logic levels. 200 MSPS@ 9 channels, 2 Gb internal memory	9 logic channels supporting 1.8V, 2.5V, 3.3V and 5V logic levels. 200 MSPS @ 9 channels, 2 Gb internal memory Industrial features: Logic channels can be multiplexed with dedicated industrial inputs that can be directly connected to: RS232, RS485, CAN and LIN buses.

The SP209 series logic analyzers and protocol decoders offer in depth analysis of logic signals and protocols with 200MHz (5ns) timing resolution. 9-channel operation allows 8-bit parallel data to be captured along with a clock or strobe signal.

The SP209i is an industrial logic analyzer with built-in specialized receivers for most common industrial busses like RS485, RS232 or CAN.  The Trigger-in and Trigger-out SMA connectors allow users to synchronize the SP209 to other lab equipment, building highly sophisticated test setups.  The Spartan 6 FPGA design provides the processing power required and can easily be firmware-updated.

The SP209 series logic analyzers rely on ScanaStudio software (runs Windows, Mac and Linux) to capture, display, analyze and decode signals. Most industry standard protocols can be interpreted, among which: SPI, I2C, USART, 1-Wire, CAN, LIN, I2C, RS232, RS485, TWI and much more (click for full list of supported protocol decoders).

Embedded 2Gb sampling memory = performance assurance

SP series logic analyzers compress and stream captured signals via USB 2.0 to a Windows, Linux or MacOS machine. USB bandwidth can be variable from a system to another, and is practically limited to 20MB/s. That\'s why SP logic analyzers have an embedded 2Gb DDR-3 memory that buffers captured samples at 1.6GB/s, overcoming USB limitations.

Powerful trigger options:

• Edge trigger
• Logic change on one or various channels
• Trigger on a sequence of timed logic signals
• Trigger on a protocol word or event (like serial word or I2C address acknowledge)
• External trigger input
• Trigger output
• Dual stage trigger (Ex: Edge trigger, then, Trigger on I2C address).

Typical applications

Designed for performance, SP series logic analyzers offer the possibility to capture and analyze 9 channels of logic signals and industrial buses at a rate of 200MHz. This is perfectly adapted for demanding applications, where it is needed to capture logic signals with maximum resolution on all 9 channels.

• Embedded systems development and debugging
• Research and educational
• Serial protocols analysis, like I2C, SPI, UART or 1-Wire (non exhaustive list)
• Industrial bus analysis: RS232, RS485, CAN, LIN
• ADC (Analog to Digital Converter) diagnostic
• Reverse engineering

Benefits

• Capture very long sequences of logic signals (up to 2 Tera samples)
• Software lets you view decoded signals in many different levels of abstractions (Packets or detailed bits and bytes)
• Target very specific event thanks to a versatile multi-stage trigger system
• Device performance do not depend on USB connection bandwidth
• Software running on Windows, macOS and Linux.
• Software is free, intuitive and very easy to use.
• Synchronize captured samples with other lab instruments via Trigger IN and OUT ports.
• Premium quality micro-grabbers probes set