IO-Warrior-56-MOD 50 I/O Line USB Module (IOW56-MOD)

Need to connect simple devices to a computer, like relays, switches, or a small display, but the computer has no parallel port or that port is in use by some other device? Using USB used to mean that you had to develop specific code for a USB-enabled microcontroller, developing a unique driver with lots of documentation and using expensive development systems.  Using USB to serial adapters is not a good option either, since the adpaters don\'t have much intelligence and require a lot of programming.

IO-Warrior56 offers a simple access to the USB since it has been designed as a generic HID device. The protocol is all in the IO-Warrior Chip. You only have to think about the I/O pins and with only a few simple lines of code to access them. IO-Warrior also supports a range of industrial standard interfaces to simplify interfacing to chips or modules. These interfaces are handled internally in IO-Warrior removing the bandwith-wasting control of individual pins.

Manufacturer Part Number:  IOW56-MOD