Introduction:The USB Industrial I/O Adapter is designed to make industrial communication port expansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Industrial I/O Adapter instantly adds an industrial multi-electrical interface serial communication port to your system. By taking advantage of the USB bus, this USB Industrial I/O Adapter makes it easier than ever to add a RS-422 or RS-485 serial device to your system with easy plug-and-play and hot plug features.
Plugging the USB Industrial I/O Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-422/485 port functions as a native Windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.
This USB to Industrial I/O Adapter provides instant connectivity to 422/485 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications, ATMs and serial communications in harsh environments. This USB to Industrial I/O Adapter provides an industrial solution for applications requiring a single node or multi-drop communications over short and long distances.
Optical Isolation & Surge Protection
Optical isolation and surge protection are supported by the USB-COMi-SI-M.
The RS-422/485 port is optically isolated with 2000 volt DC optical isolation. The optical isolation protects your PC or notebook from spikes and surges on the RS-422/485 network by converting the electrical pulse into an optical signal and then changing it back to an electrical pulse. Your computer is well protected, since the surges and spikes cannot cross the optical link.
The RS-422/485 port is protected by a surge protector to withstand electrostatic discharges and power surges up to 25KV ESD. Surge suppression on all signals prevents damage caused by lightning or high voltages.
Specifications & Features:
- Adds a high speed RS-232/422/485 serial port via USB connection
- 384 byte receive buffer.
- 128 byte transmit buffer for high speed data throughput.
- The RS-422/485 port is optically isolated with 2000 Volt DC optical isolation.
- The RS-422/485 port is protected by surge protection to withstand electrostatic discharge and power surges up to 25KV ESD.
- Requires no IRQ, DMA or I/O port.
- Data rate speed range: 300 bps to 921,600 bps
- Serial Connector: one DB-9 male connector, and one 6-pin Terminal Block
- Auto transmit buffer control for 2-wire RS-485 half-duplex operation.
- Termination resistors installed on-board.
- RS-422 data signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS-.
- RS-485 data signals: Rx-, Tx+, Rx+, Rx- (r wire), and data-, data+ (2 wire).
- Provides LEDs which show transmitting and receiving of data.
- External 4-pin dip switch to set RS-422 or RS-485 modes.
- Easily mountable.
- Metal housing.
- Virtual COM port drivers provided for Windows 98, 98SE, ME, 2000, XP & 2003.
- Dimensions:2 5/16" x 3" x 1"
