EX-9530 Isolated USB1.1-RS232/422/485 termblock

While supplies last!

The EX-9530 convert is an intelligent, stackable expansion module that connects to a PC USB port or USB Hub via the Universal Serial Bus (USB) port, providing one High-Speed RS-232/RS-422 or RS-485 serial port (jumperless) The EX-9530 features easy connectivity for traditional serial devices.

The RS-232 standard supports full-duplex communication and handshaking signals (such as RTS, CTS) and The RS-485 control is completely transparent to the user and software written for half-duplex COM works without any modification.

The EX-9530's Opto-isolators provide 3000 Vdc of isolation to protect the host computer from ground loops and destructive voltage spikes on the RS-232/RS-422 and RS-485 data lines.

EX-9530 also offer internal surge-protection on their data lines. Internal high-speed transient suppressors on each data line protect the modules from dangerous voltages levels or spikes.

The EX-9530 module derives the power from USB port and doesn't need any power adapter.

Features

• USB Specification 1.1 Compliant

• Auto direction flow control on RS-485

• Full-Duplex RS-232/RS-422 support

• RS-232 support RTS & CTS handshake signals

• Minimum 3000 VDC isolation protection

• Transient suppression on RS-485 data lines

• Auto switching for USB to RS-232/RS-422 or RS-485(jumperless)

• Auto Switching Baud Rate up to 115.2 Kbps

• Reserved space for termination resistors R1(TX/DATA), R2(RX)

• Power and data flow indicator for troubleshooting

• Driver support for Windows 95/98/ME/2000/XP, Linux

• Mounts easily on DIN-rail or panel

• Power requirement: Self Power

Specifications

• USB Controller: Compatibility USB Specification 1.1 Standard
• USB interface connector: USB type B
• Isolation Side: RS-232/ 422/485
• Converted signals: RS-232/RS-422 or RS-485 Auto switching (jumperless)
• Handshakel: RS-232 support RTS & CTS handshake signals
• Auto Switching Baud rate (bps):300 ~115.2 K BPS
• Transmission and Receiving LED indicator
• Isolation voltage: 3000 V DC
• RS-232/RS-422/RS-485 connector: plug-in screw terminal
• Accessories (Supplied) NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket
• Plug-in screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5 mm) wires
• Power requirement: USB bus power
• Case: ABS with captive mounting hardware
• Power consumption: 0.65 W
• Operating temperature:0 ~ 70 °C (32 ~ 158 °F)
• Storage temperature:-25 ~ 85 °C (13 ~ 185 °F)
• Humidity: 5 ~ 95%, non-condensing