Motion Basic Controller Chip with EEPROM (KAE-MBV1-DP)

Motion Basic Controller Chip

Datasheet

Specifications:

• Master controller for creating stand-alone motion control systems
• Plugs into socket on the SSA-485 adapter board
• Create simple Motion Basic programs using our Windows based programming utility
• Easy-to use BASIC programming language
• Controller chip also provides a simplified ASCII Command Interface (ACI) mode

The Motion Basic controller chip is a microcontroller which allows you to create simple stand-alone motion control programs for up to 8 of ourNMC motion control modules. Using our easy-to-use Windows based programming and debugging utility you can quickly create BASIC language programs which include motion commands.Motion Basic programs can also communicate with another computer over an RS232 or USB port.The Motion Basic controller chip is designed for use with our SSA-485 board to allow non-programmers to create simple motion control applications.

The Motion Basic controller chip also includes a simplified ASCII Command Interface (ACI) mode for communicating directly with our NMC motion controllers.When operating in ACI mode, you can send simple ASCII commands (e.g.: "1 svmp 5000") to the controllers using an RS232 terminal or a terminal program. While not as efficient or powerful as the nativebinary NMC communications protocol, ACI mode commands can be much simpler to use for non-demanding applications.

Manufacturer Part Number:  KAE-MBV1-DP