New
Product Press Release
New
Product Press Release
For Immediate Release - July 15, 2008
Tiny Multipoint RF Module Offers Direct Analog Input.
Pittsford, NY: EmbedRF is a new miniature wireless board which can be easily configured as a periodic transceiver for applications such as parameter or medical data-logging, or an on-demand transceiver for remote control applications. With 4 analog inputs, EmbedRF can directly interface with voltage-output sensors and transmit the information up to 50 feet. Bidirectional transmit/receive point-to-point and point-to-multipoint capabilities make this module a unique wireless solution for applications requiring a simple off-the-shelf, low-power, turn-key answer. Weighing in at only 1.4g and sized at a tiny 0.8 x 0.7 about the size of a postage stamp - EmbedRF even includes an on-board antenna in its 4-layer board. Less than 0.2 thick, this transceiver is ideal for including in size-conscious products like toys, personal or medical loggers, or mobile equipment.
Operating with an output
power up to 5dBm at frequencies from 400MHz to 928MHz, EmbedRF modules
feature intelligent search and sophisticated 24-bit security capabilities.
EmbedRF can work on 2.0 to 3.6V from
-40degC to 85degC without trimming. EmbedRF will operate in
point-to-point one-way, two-way, or two-way multipoint star-connection. Based
on Chipcons CC1100 chipset, EmbedRF typically uses less than 0.3uA when
sleeping, so with periodic transmissions of
0.25s to 12.75s an extremely long battery life is possible average
current consumption ranges from 255uA to as low as 6 uA depending on
transmission interval. EmbedRF offers up to four analog inputs with
10-bit resolution for 0 - 3V signals, or 2 analog inputs and 2 digital output
lines. EmbedRF configuration is very easy with the pull-down menu
software provided. This unique transceiver module also does
CRC
RF packet
error
checking, and
even provides a digital
RSSI
signal
output.
Beacon (a division of Safe Retrieve) is using the EmbedRF technology within their mobile electronic systems. EmbedRF technology is used to notify the mobile system that it is in short range of a base unit, allowing the mobile system to save power. Scott Swanson, Beacons CEO, says:The EmbedRF wireless solution was clearly the fastest way to develop a new product with a reliable low-power wireless functionality. I also like the fact that the EmbedRF transceiver provides distance information between the transmitter and receiver a critical feature for our application.
The EmbedRF Development Kit includes: two EmbedRF modules, a USB Interface Board, a USB cable, a CR2032 3V lithium coin cell battery with battery attachment board, and an EmbedRF Desktop Pro Software CD. Designed and made in theUSA, the EmbedRF Development Kit is available now with individual modules from their USA distributor Saelig Co. Inc. For manufacturers who need volume production and lowest costs, design licensing is also offered.
