N E W P R O D U C T  -  P R E S S R E L E A S E  

June 9, 2005  -  for immediate release: 

New USB-adaptor turns PCs  

into Fast Scopes!

Pittsford, NY. PicoScope 2202™ is a new PC scope adapter that turns an ordinary PC into a 2 MHz scope. And it is small enough to carry anywhere you need since it’s powered from the USB port.

 With a fast USB 2.0 interface, 20 MS/s sampling and 2 MHz bandwidth, PicoScope 2202™ provides the performance, features and quality you would expect from a bench-top oscilloscope, all at an affordable price. This inexpensive, dual channel, USB oscilloscope is ideally suited for use by hobbyists and students, yet with its fast sampling rate it is also powerful enough to be used by electronics technicians for scientific, and general analog and digital circuitry.

• 2 Channels
• 20 MS/s 8-bit sampling rate
• 2 MHz bandwidth
• Ranges ±50 mV to ±20 V
• 32 kB buffer memory
• No power supply required
• USB 2.0 connection for fast screen updates

PicoScope 2202™ is suitable for use on any laptop or desktop PC with a USB port, running Microsoft Windows 98SE or above. Simply plug PicoScope 2202™ into the USB port, no power supply is required, and the PicoScope is ready to use.  Supplied with PicoScope software , you get simultaneous oscilloscope, spectrum analyzer and multimeter functions.  PicoScope software makes full use of the PC's processing capabilities, allowing you to view real-time signals, zoom in on your signal, and save and print captured waveforms. Also supplied is PicoLog data acquisition software that gives the functionality of a high-speed data logger.

Click HERE to order