USB-PETSaelig Logo

 

 

 

NEW PRODUCT ANNOUNCEMENT
FOR IMMEDIATE RELEASE
: Sept 12, 2011
Contact:   Alan Lowne, CEO, Saelig Co. Inc.
                 Tel: (585) 385-1750   info@saelig.com


Saelig Debuts Packet-Master USB-PET Protocol and Electrical Tester


Pittsford, NY, USA:  Saelig Company, Inc. announces the Packet-Master USB-PET - a unique USB protocol and electrical tester capable of performing the suite of tests defined in the USB Implementers Forum, Inc.’s 'Battery Charging, USB On-The-Go and Embedded Host Automated Compliance Plan' (http://www.usb.org/developers/onthego/otgeh_compliance_plan_1_0.pdf). Packet-Master USB-PET is connected to a host PC using a High-Speed USB connection, and controlled using the GraphicUSB application software, which can generate test reports and perform analyzer-style captures.USB-PET’s front panel features a micro-AB receptacle and a D-type connector for connection to a Unit-Under-Test. The rear-panel allows the connection of a meter or an oscilloscope for monitoring, for example, VBUS voltage. 

The comprehensive series of tests that Packetmaster USB-PET can perform includes:

OTG Compliance Testing:  USB-PET provides automated compliance testing of both the data protocol and the electrical and timing requirements of the 'On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification'. All aspects of On-The-Go and Embedded Hosts are tested, including VBUS voltage and current performance, and SRP, HNP and ADP protocols.

Battery Charging Compliance Testing: USB-PET can carry out the compliance testing required by the USB Charging Port Compliance Plan, including tests on Charging Ports, Portable Devices, and Accessory Charger Adapters.

Analyzer Functionality: USB-PET can capture an analysis of bus activity during the compliance test, in the same format as other MQP analyzers. This allows rapid investigation of protocol-based test failures.

Control of Testing: Tests are usually carried out as a suite for a particular type of Unit-Under-Test (UUT) but individual tests can also be selected to investigate a particular failure. Users can even write their own test scripts to modify parameters for more in-depth or special investigations.

High Speed Electrical Test Modes: Single click operations allow the initiation of any of the High Speed Electrical Test modes defined in the supplement and the core USB specification.

 

Physical Specifications
Weight: 500 g
Dimensions: 190 x 140 x 52 mm
Temperature: 0°C - 40°C
Humidity: 20% - 80% non-condensing



High Quality Image

Order on-line HERE

digg toolbar   StumbleUpon Toolbar   Bookmark this on Delicious