New Product Press
Release
Sept 4, 2007 for Immediate Release
Serial-to-Ethernet Gateway
Offers Quick, Simple Internet Interface
Pittsford, NY: WIZ110SR is a plug’n’play, extremely reliable gateway module that converts RS-232 protocol into TCP/IP protocol – and even includes DB-9 and RJ45 connectors for immediate use. WIZ110SR enables remote checking, managing and control of devices via Ethernet and TCP/IP by connecting existing RS-232 equipment at up to 230Kbps to a network. WIZ110SR is a protocol converter that automatically converts and transmits data sent by serial equipment to TCP/IP data and converts the received TCP/IP data into serial data for the equipment.
Simple software set-up allows users to rapidly
create a 10/100Mbps Ethernet interface with a maximum serial rate of 230Kbps.
WIZ110SR
is a compact 2” x 1.2” board with built-in system connectors to allow any device
with serial inputs and/or outputs to be Ethernet/Internet-enabled for less than
$29! WIZ110SR offers TCP, UDP, IP, ARP, ICMP, IGMP, Ethernet MAC, PPPoE
protocols on a 10/100 Base-T auto-detecting Ethernet network. WIZ110SR
ensures excellent stability and reliability since it uses the hardwired TCP/IP
stack IC W5100 from Korea’s specialist TCP/IP IC house WIZnet.
WIZ110SR
is based on WIZnet’s TCP/IP-offload IC W5100 with built-in Ethernet
driver stage. Set-up for WIZ110SR is very easy with the configuration
software provided. Three different modes of operation are supported: TCP server,
TCP client, and UDP. TCP guarantees data delivery, but UDP doesn’t require
acknowledgement, so communication can be faster. Once the TCP client and server
have established connection, data can be transparently transmitted
bi-directionally. WIZ110SR’s IP Address can be manually assigned (static
IP), or IP, subnet and gateway address can be acquired from the DHCP server
automatically. Serial commands can be hardware- or software-triggered.
Configuration can be done on-site if need be, even without a PC,
using a simple serial device (keypad, etc.) Power required is 3.3V @
150mA.
WIZ110SR is available now from stock at Saelig Co.
Hi-Res Image: http://www.saelig.com/images/wiz110sr300.jpg
