The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide-range of applications.
Note: The TA095 can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE.
| Performance | SI* |
| Sensitivity (±15%) | 10.2 mV/(m/s2) |
| Measurement range | ±490 m/s2 |
| Frequency range | 0.5 Hz to 10 kHz |
| Broadband resolution (1 Hz to 10 kHz) | 3434 µm/s2 |
| Non-linearity | ±1% |
| Transverse sensitivity | ≤ 7% |
| Electrical | SI* |
| Settling time (within 1% of bias) | ≤ 2.0 sec |
| Discharge time constat | ≥ 0.3 sec |
| Excitation voltage | 18 to 28 VDC |
| Constant Current Excitation | 2 to 20 mA |
| Output impedance | < 150 Ω |
| Output bias voltage | 8 to 12 VDC |
| Spectral noise (10 Hz) | 78.5 (µm/s2)√Hz |
| Spectral noise (100 Hz) | 49.1 (µm/s2)√Hz |
| Spectral noise (1 kHz) | 39.2 (µm/s2)√Hz |
| Electrical isolation (case) | > 108 Ω |
| Environmental | SI* |
| Overload limit (shock) | 49 050 m/s2 pk |
| Temperature range | -54 °C to + 121 °C |
| Enclosure rating | IP68 |
| Physical | SI* |
| Size (hex x height) | 14 mm x 64 mm |
| Weight (with cable) | 99.3 g |
| Mounting | stud |
| Mounting thread | 1/4-28 female |
| Mounting torque | 2.7 to 6.8 Nm |
| Sensing element | ceramic |
| Sensing geometry | shear |
| Housing material | stainless steel |
| Sealing | molded |
| Electrical connector | molded integral cable |
| Cable length | 3 m |
| Cable type | polyurethane |
