• ABI Electronics
  • Rigol MSO5152-E
  • Siglent SDS1000X-E
  • Tekbox
  • WaveSurfer 3104Z
  • Preen
  • ThinkRF
  • Teledyne LeCroy
  • Free Pico Flash Drive
  • Saelig 30 Years in business!
  • Teledyne LeCroy Free Products
  • Rigol RSA5000
  • Cambrionix
  • Teledyne LeCroy
  • Not Your Average Web Store
  • Rigol MSO
  • Windfreak
  • GL Optic
  • Your Technical Distributor
  • Rigol Promotions
  • SDM3000
  • Choosing An Oscilloscope
  • Saelig Newsletter Signup
  • Free Shipping
  • Saelig Scope Selection
  • Saelig Values
  • YouTube Videos
  • Saelig Name Origins
  • LD400


PICO WPS500X Automotive Pressure Transducer (PP652)

    PICO WPS500X Automotive Pressure Transducer (PP652)

    Manufacturer: Pico Technology


    Price: $707.00

     

    Saelig GSA Schedule Logo
    • Description
    • Features
    • Downloads

    With the uncompromising resolution and accuracy of the WPS500X Automotive Pressure Transducer you can perform quick and accurate pressure analysis of many automotive systems.

    Accurately measure up to 500 psi

    • Ultra-fast 100 µs response time
    • Zoom function for enhanced analysis capabilities
    • Internal rechargeable LiPo battery
    • Integrated pressure relief / bleed-off valve
    • Auto zeroing
    • High noise immunity
    • Temperature compensated

    The WPS5000X features an extremely fast 100 µs response rate from 0% to 90% of full scale and sensitivity down to about 0.07 psi (5 mbar). This provides you with an accurate representation of rapidly changing signals that span across a broad pressure range.

    Three pressure ranges = performance and versatility

    The three pressure ranges of the WPS500X allow for accurate measurement and analysis of many automotive pressures including cylinder compression, fuel pressure, intake manifold vacuum and even pulses from the exhaust.

    Range 1

    Running compression waveform

    The first range gives you high resolution and accuracy for high-pressure tests such as cranking and running cylinder compression or fuel pressure testing. Not only is this test a great way for you to find compression issues, but it is also an excellent way for you to identify cam timing issues such as jumped timing belts and stretched timing chains — this is especially useful on multi-cam engines that may not have a cam sensor on each camshaft.

    Range 2

    The second range measures from -15 to 50 psi (approximately -1 to 3.45 bar). This range is ideal for vacuum tests and fuel system tests. When testing these systems you will find the zoom function is especially useful as it makes it easy to analyse the valves operating with the vacuum waveform, or the injectors through the fuel waveform.

    Intake manifold vacuum during snap-throttle

    Range 3

    With the third range you can measure -5 to 5 psi (approximately -0.34 to 0.34 bar). This setting is sensitive enough to allow you to analyse small pressures or pulses such as pulses from the exhaust.

    Range
    Pressure range
    Accuracy
    Response time
    Output scaling
    1
    -15 to 500 psi
    1% of scale
    &100 µs
    10 mV/1 psi
    -1 to 34.47 bar
    (500 psi = 5 V)
    2
    15 to 50 psi
    1% of scale
    &100 µs
    100 mV/1 psi
    1 to 3.45 bar
    (50 psi = 5 V)
    3
    5 to 5 psi
    5% of scale
    filtered
    1 V/1 psi
    0.34 to 0.34 bar
    (5 psi = 5 V)

    Built-in zoom function for enhanced analysis

    Using the zoom function to show intake valve pulses (ChA)

    The zoom function operates by removing all of the voltage from the signal below 100 Hz and then multiplying the remaining signal up to 100 times. For example: Let's say your transducer is connected to the intake manifold vacuum on a running engine at idle with the transducer set to mode 2 (-15 to 50 psi) and the waveform on your PicoScope is at -9 psi. The fluctuation in the signal caused by the valves opening and closing versus atmospheric pressure forcing air into the manifold will be visible, but will only make up a small portion of the overall signal. Selecting the zoom function will bring the waveform up to the zero line and the fluctuations will be magnified making analysis of this component of the signal much clearer.

    PP652 Kit Contents

    • TA071 WPS500X pressure transducer 
    • TA081 Cable: USB to mini USB Cable 2 meters
    • TA098 Cable: insulated BNC to insulated BNC cable 5 meters
    • PA094 Hard Plastic Carry case
    • DO157 User Manual

    Nothing compares to the WPS500X

    It is not unusal to require a different pressure transducer for each diagnostic test you want to run. The WPS500X eliminates this need by giving you one ultra-high resolution transducer that can be used for a multitude of automotive diagnostic applications. With three pressure ranges, a zoom function, pressure relief valve and a rechargeable Li-Po battery all enclosed in a durable housing the WPS500X is the cost-effective answer to pressure analysis.


    Customers who purchased this product, also purchased...



    Free UPS Ground Shipping On Orders Over $99

    Sign up for our newsletter containing updates and exclusive content!


    Customer Reviews

    Privacy Policy|Terms and Conditions|RoHs|Quality Statement|Returns|Sitemap

    © 2007- Saelig Company, Inc. All Rights Reserved.
    Other products, logos and company names mentioned herein, may be trademarks of their respective owners.
    eCommerce Shopping Cart Software by Miva Merchant