• Saelig 33 Years in business!
  • PS4000A
  • Boonton Promo
  • Rigol
  • Siglent
  • Cambrionix
  • Teledyne LeCroy Wavesurfer 3000z Promo
  • Siglent SSA3000X-R
  • Ideal-Tek
  • Teledyne LeCroy Wavesurfer 4000HD Promo
  • Siglent SDS1000X-E
  • Tekbox
  • PicoScope 6000E
  • PicoScope 6000E
  • ABI Electronics
  • Windfreak
  • Rigol MSO5152-E
  • ThinkRF
  • Rigol RSA5000
  • Teledyne LeCroy Free Products
  • Preen
  • Free Pico Flash Drive
  • Saelig 33 Years in business!
  • GL Optic
  • Teledyne LeCroy
  • Not Your Average Web Store
  • Rigol MSO
  • Free Shipping
  • Your Technical Distributor
  • Rigol Promotions
  • SDM3000
  • Choosing An Oscilloscope
  • Saelig Newsletter Signup
  • Saelig Scope Selection
  • Saelig Values
  • YouTube Videos
  • Saelig Name Origins
  • LD400

Dataman 48UXP Universal Programmer

    Dataman 48UXP Universal Programmer

    Manufacturer: Dataman

    This product is no longer available at Saelig.


    • Description

    Note:  Adapter modules for the Dataman programmers are not returnable for refund or credit except where a unit is found to be defective and the seller is immediately contacted for replacement. 

    Universal 48-pin chip programmer with USB 2.0 and parallel connectivity. Dataman 48UXP features intelligent hardware, including microprocessor and FPGA, allowing it to program devices you use today and the devices of tomorrow.

    Optimized for both laboratory and production the Dataman 48UXP is intelligent, fast and easy to use.


    • The Dataman 48UXP's on-board intelligence reduces system overhead to a minimum. This gives a 100% performance increase over its predecessor when programming high-density flash devices e.g. Intel 32 Mbit flash chip in less then 60 seconds
    • The Dataman 48UXP performs device insertion and contact checks before programming each device. It can detect poor pin contact and devices inserted upside down or in the wrong position preventing expensive chip damage due to operator error
    • The Dataman 48UXP's universal pin driver capability lets it program all 48-Pin DIL devices, including all single-chip Micro-controllers, without DIL-to-DIL adapters
    • The Dataman 48UXP has additional safety features such as a built-in current limit and pin continuity check function. This prevents damage from faulty chips during the programming cycle
    • Included with the Dataman 48UXP is a 44-Pin universal adapter that enables you to support 44-Pin chips such as EPLD, EPROM, Flash, EPLD and Micro-controllers, eliminating the need to buy multiple adapters
    • The Dataman 48UXP supports 2.0V ~ 5.0V logic level input/output and can supply 2.0V ~ 21V analogue voltages such as VCC. Low voltage support (1.8V) is also possible by a low voltage adapter

    Base Unit (DAC)

    • USB 2.0 port
    • FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
    • On-board intelligence: powerful microprocessor and FPGA based state machine
    • Power: 100 to 240 VAC, auto-switching
    • Frequent range: 47 to 63 Hz
    • Power consumption: 25 W
    • Operating temperature: 5 to 45°C (41 to 113°F)
    • CE & LVD certified

    ZIF Socket

    • 48-pin DIL/ZIF socket with receptacle for 8-Pin to 48-Pin 300/ 600-mil devices
    • Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution. Software controllable rises time and current limit protection.
    • Logic driver supports pull-up/ pull-down or high impedance on all 48 pins with 2.0V-5V level

    User Interface

    • Many EPROM and Flash memories have a build-in device ID and manufacturer ID. The Dataman 48UXP can read the device's ID by press hot key to detect the ID and compare its database and determined the chip's correct vendor and product number. This feature is especially useful with second-hand chips and devices that have had their part number accidentally removed
    • To meet mass-production requirements the Dataman 48UXP has implemented new patented technology in both its hardware and software. After entering the Mass-production Mode, the production line operator inserts a device into the ZIF socket. An LED on the Dataman 48UXP indicates the device is ready and the operator simply removes it and replaces it with a new one. The Dataman 48UXP's auto-sensing feature ensures the device has been inserted correctly and then automatically programs the device.
    • In the mass-production mode the system keyboard is automatically disabled preventing the operator from making any inadvertent mistakes and with no formal training necessary adds flexibility, saves time and money
    • User can create and save a project file which contains device selection, buffer data and all the programming set-up options. This project file can then be loaded for future use reducing set-up times
    • The Dataman 48UXP has an Auto Increment function which simply increments the serial numbers in the buffer each time a new device is inserted, saving time and money
    • User-selectable verify voltage with one or two-pass verification. This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention
    • Accepts JEDEC test vectors up to 48 pins
    • Automatic file format detection and conversion: JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S, HP 64000ABS, Straight Hex and TEKTRONIC Hex

    Device Support

    The Dataman 48UXP supports over 32,000 of the most popular devices in use today – with future devices being added every day. Dataman 48UXP coverage includes the following device types:

    ZIF socket

    • BI-PROM
    • EPROM
    • EEPROM
    • EPLD
    • CEPAL
    • CDLD
    • CPAL
    • CPLD
    • GAL
    • Flash
    • FPGA
    • MACH
    • MROM
    • NVRAM
    • PAL
    • PEEL
    • PLD
    • PROM
    • SPLD
    • Microcontrollers

    Free UPS Ground Shipping On Orders Over $99

    Sign up for our newsletter containing updates and exclusive content!

    Customer Reviews

    Privacy Policy|Terms and Conditions|RoHs|Quality Statement|Returns|Sitemap

    © 2007- Saelig Company, Inc. All Rights Reserved.
    Other products, logos and company names mentioned herein, may be trademarks of their respective owners.
    eCommerce Shopping Cart Software by Miva Merchant