|
PicoScope 2202 8-bit 2-ch 2MHz USB Scope Adapter (PP296)
Manufacturer: Pico Technology
This product is superseded by the PicoScope 2204A (PP906).
| Oscilloscope |
| Bandwidth |
2 MHz |
| Channels |
2 |
| Vertical resolution |
8 bits |
| Enhanced vertical resolution |
12 bits |
| Dynamic range |
48 dB |
| Accuracy |
±3% |
| Input ranges (full scale) |
±50 mV to ±20 V |
| Input characteristics |
1 MΩ in parallel with 20 pF |
| Overload protection |
±100 V (signal input) |
| Input type |
Single-ended, BNC connector |
| Input coupling |
Software selectable AC/DC |
Maximum sampling rate (single shot)
One channel in use
Two channels in use |
20 MS/s (single channel)
10 MS/s (dual channel) |
| Buffer memory |
32 kS |
| Waveform buffer |
Up to 1000 waveforms |
| Environmental |
Operating environment
Temperature
Humidity |
+20 °C to +30 °C for quoted accuracy, 0 °C to +70 °C overall.
20 to 90% RH |
| Physical Dimensions |
| Dimensions |
140 x 190 x 45 mm (5.51 x 7.48 x 1.77 in) |
| PC Requirements |
| Minimum |
Processor: Pentium II processor, or equivalent
Memory: 64 MB (XP) / 512 MB (Vista) minimum
Operating system: Microsoft Windows XP SP2 (32-bit) or Vista (32 or 64-bit)
Ports: USB 1.1 compliant port |
| Recommended |
Processor: 2 GHz Pentium IV processor, or equivalent
Memory: 256 MB (XP) / 1 GB (Vista)
Operating system: Microsoft Windows XP SP2 (32-bit) or Vista (32 or 64-bit)
Ports: USB 2.0 compliant port |
| Software |
| PicoScope 6 for Windows |
PicoScope 6 is your complete test and measurement lab in one application. Features include:
Capture modes: oscilloscope, spectrum and persistence.
Channel maths: calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions.
Mask limiting testing: pass/fail, failure count, total count.
Serial Decoding: decode data from a serial bus such as I²C.
Automated measurements
Scope mode: AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak–to–peak, rise time and rising rate.
Spectrum mode: frequency at peak, amplitude at peak, average amplitude at peak, total power, total harmonic distortion (THD % and THD dB), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD).
Export data formats: comma separated values (CSV), tab delimited (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT).
|
| PicoLog for Windows |
PicoLog data acquisition software can collect up to 1 million samples. Features include:
Multiple views — view data as a graph, spreadsheet or text
Parameter scaling — convert raw data into standard engineering units
Math functions — use mathematical equations to calculate additional parameters
Alarm limits — program an alert if a parameter goes out of a specified range
IP networking — transfer measurements via a LAN or over the Internet
|
| Linux drivers |
32-bit and 64-bit |
| Software development kit |
A growing collection of drivers and example code for various programming languages |
| Language support |
Software
PicoLog
PicoScope 6 |
Full support for English, French and German; menus only for Italian, Spanish and Swedish
Full support for: English, Français, Deutsch, Italiano, Español
Menus and dialogs only for: 中文 (简体), 正體中文 (繁體), Čeština, Dansk, suomi, Ελληνικά, Magyar, 日本語, Norsk, Polski, Português, română, Русский, Svenska, Türkçe |
Documentation
User’s guide
Programmer’s guide
Installation guide |
English
English
English, Français, Deutsch, Italiano, Español |
| General |
| Additional hardware (supplied) |
USB 2.0 cable, user manuals, software CD-ROM |
| PC interface |
USB 2.0 (USB 1.1 compatible) - cable supplied |
| Power requirements |
Powered from USB port |
| Compliance |
FCC, CE |
| Total Satisfaction Guarantee |
In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. |
| Warranty |
2 years |
|
