Welcome to Saelig.com


FT245BL

FT245BL

Manufacturer: FTDI

Price: $4.87

Volume Price
Quantity Price Each
1-9 $4.87
10-49 $4.69
50-99 $4.39
100-499 $3.99
500-999 $3.59
1000-1999 $3.19

FT245BM, FT245BL & FT245BQ - USB FIFO ICs
The FT245BM is the 2nd generation of FTDI's popular USB FIFO device and the FT245BL is a lead free version of it. The FT245BQ provides the same functionality as the FT245BM and FT245BL in a QFN-32 lead free package.

 

This device not only adds extra functionality to its predecessor (FT8U245AM) and reduces external component count, but also maintains a high degree of pin compatibility with the original making it easy to upgrade or cost reduce existing designs as well as increasing the potential for using this device in new application areas.

 

 

Product Information

 

 

 

Key Hardware Features
  • Single Chip USB <=> parallel FIFO bi-directional data transfer
  • Data transfer rate of up to 1M Byte/second (D2XX drivers)
  • Data transfer rate of up to 300K Byte/second (VCP drivers)
  • Simple to interface to MCU/PLD/FPGA logic with a 4-wire handshaking interface
  • Entire USB protocol handled on-chip: no USB-specific firmware programming required
  • FTDI's royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
  • 384 Byte FIFO Tx buffer/128 Byte FIFO Rx buffer for high data throughput
  • New send immediate support via SI pin for optimised data throughput
  • Support for USB suspend/resume through PWREN# and WAKEUP pins
  • Support for high power USB bus powered devices through PWREN# pin
  • Adjustable Rx buffer timeout
  • Built-in support for event characters
  • Integrated level converter on FIFO and control signals for interfacing to 5V and 3.3V logic
  • Integrated 3.3V regulator for USB IO
  • Integrated Power-On-Reset circuit
  • Integrated 6MHz - 48Mhz clock multiplier PLL
  • USB Bulk or Isochronous data transfer modes
  • New Bit-Bang Mode allows the data bus to be used as an 8 bit general purpose IO port without the need for MCU or other support logic
  • 4.35V to 5.25V single supply operation
  • UHC/OHCI/EHCI host controller compatible
  • USB 1.1 and USB 2.0 compatible
  • USB VID, PID , serial number and product description strings in external EEPROM
  • EEPROM programmable on-board via USB
  • Compact 32-LD LQFP or QFN-32 package
  • Available as a Lead-free device (FT245BL and FT245BQ) compliant to EU directive 2002/95/EG RoHS

 

 

Application Areas
  • Easy MCU/PLD/FPGA interface to USB
  • Upgrading legacy peripheral designs to USB
  • USB instrumentation
  • USB industrial control
  • USB audio and low bandwidth video data transfer
  • PDA <=> USB data transfer
  • USB MP3 player interface
  • USB FLASH card readers/writers
  • Set Top Box (S.T.B.) PC - USB interface
  • USB digital camera interface
  • USB hardware modems
  • USB wireless modems

This part supercedes the FT8U245AM and FT245BM chips.


Login to review this product


Customers who purchased this product, also purchased...



Free UPS Ground Shipping On Orders Over $250

Sign up for our newsletter containing updates and exclusive content!


Privacy Policy|Terms and Conditions|RoHs|Quality Statement|Returns|Sitemap

© 2007- Saelig Company, Inc. All Rights Reserved.
Other products, logos and company names mentioned herein, may be trademarks of their respective owners.
eCommerce Shopping Cart Software by Miva Merchant