The GDS-1072B 2-channel 70MHz Digital Oscilloscope is a compact, innovative test tool with a maximum sampling rate for each channel of 1GSa/s, and 10Mpts/ channel waveform memory. The 7" WVGA color LCD display is updated at the rate of 50,000wfms/s – and the display 256 color gradient capability makes signal discrimination easier.
The 1Mpts FFT signal display shows the frequency display of signals, which helps when debugging circuit problems or characterizing filters. Multiple trigger functions, X-Y mode analysis, and Go/NoGo capability means that the GDS-1000B series oscilloscopes compete with higher level products. The GDS-1072B’s OpenWave connection software allows waveform observation, data storage and control from a remote PC.
All of the oscilloscopes in the GDS-1000B series have a data-logging function option for observing and recordings over a long time period. This can be set by data storage time or interval based on the test requirements. Record time can be set from five minutes to 100 hours, at intervals as short as five seconds. Data log formats include waveform and point data in CSV file and can be saved to USB, on the GDS-1000B itself, or on a remote computer via LAN.
The GDS-1000B Series Oscilloscope are equipped with 36 different automatic measurements - eight sets of different measurement parameters can be seen simultaneously at the bottom of the display. You can also elect to show all 36 parameters if desired. This is a very convenient measurement tool for preparing engineering reports, and student projects.