Ramsey STE3000 RF/EMI Test Enclosure (Refurbished)

This refurbished unit is an older version of today’s STE3000.  It was refurbished at the Ramsey factory where gaskets, gloves and RF-absorbent foam were replaced, and the unit tested.  The testing showed it will provide an average of more than 60 dB of attenuation up to well over 6 GHz.

The unit has the following pass-through connectors: CONN390 (SMA to SMA Feedthrough) and STERJ45 (RJ45 Adapter Kit on a CONN207, which is a 100 pF DB9).

RF-Tight Testing ... Made Easy    Trust YOUR RF Testing To Ramsey's Patented Design!

• Wireless device testing
• Perfect for 802.11a, b, g
• Bluetooth, RFID, 3G testing
• Wide variety of I/O options
• Super isolation up to 18GHz
• Stock models to fit your custom applications

The RF Test Enclosure that started it all!  How do you troubleshoot, tune, align and test a device in an RF free environment?  Well, up until now you had to invest in a very expensive RF screen room.  The patented STE3000B brought that technology right down to your bench, and the cost all the way down to affordable!  The STE3000B is constructed of .090 Aluminum, utilizing precision machined tolerances throughout to maintain an RF-Tight environment.Ramsey's special "double lip" technology gives you an RF isolation greater than 90dB down at 1GHz!

The heavy duty RF-sealed cover hinges open and close with a precision air piston.  Once closed, a large RF-tight viewing window overlooks the entire working area within the enclosure.  Hands-on troubleshooting, tuning and access to the device under test are accomplished using specially designed, silver impregnated, ultra fine mesh gloves that offer excellent manual dexterity and hands-on access to the equipment under test.  The entire interior is lined with RF-absorbent foam that provides 24dB attenuation.  The work area has built-in illumination via two low-voltage incandescent lamps powered by the RF-Filtered AC Supply.  All of the I/O connections and interfaces are provided within a precision-machined I/O panel.  This panel can be configured with your own custom connector and interface options without affecting the integrity of the enclosure itself.  It also allows your enclosure to be "custom configured" from a standard stock enclosure.  For you that means speedy delivery and lower costs! Simply choose your I/O's and options from the list provided below and your enclosure will be configured to your spec!  Sounds too good to be true.  Ramsey thought so too; that's why they have a patent on it!DESCRIPTIO

2.4GHz devices are commonplace today.  But with the development of 802.11a, 5.6GHz devices are beginning to surface. Ramsey has you covered at both bands!  Whether you're testing or installing 802.11b, 802.11a, or 802.11g, one single STE series enclosure will provide you the tightest test attenuation possible.  Perfect for today, even better for tomorrow! COMPATIBILITY!

RELIABILITY!

Ramsey has been a leader in Wireless Test Equipment Solutions for over three decades!  With the introduction of their patented STE3000, they proved to the world that you could effectively troubleshoot and test in an interference free environment without the expense of a full size screen room.And the quality and performance continues today...to 18GHz and beyond!