• Siglent
  • Cambrionix
  • Teledyne LeCroy Wavesurfer 3000z Promo
  • Siglent SSA3000X-R
  • Ideal-Tek
  • Teledyne LeCroy Wavesurfer 4000HD Promo
  • Siglent SDS1000X-E
  • Tekbox
  • PicoScope 6000E
  • PicoScope 6000E
  • ABI Electronics
  • Windfreak
  • Rigol MSO5152-E
  • ThinkRF
  • Rigol RSA5000
  • Teledyne LeCroy Free Products
  • Preen
  • Free Pico Flash Drive
  • Saelig 30 Years in business!
  • GL Optic
  • Teledyne LeCroy
  • Not Your Average Web Store
  • Rigol MSO
  • Free Shipping
  • Your Technical Distributor
  • Rigol Promotions
  • SDM3000
  • Choosing An Oscilloscope
  • Saelig Newsletter Signup
  • Saelig Scope Selection
  • Saelig Values
  • YouTube Videos
  • Saelig Name Origins
  • LD400


TekBox TBL5016-1 50UH 16A Line Impedance Stabilization Network LISN

    TekBox TBL5016-1 50UH 16A Line Impedance Stabilization Network LISN

    Manufacturer: Tekbox Digital Solutions


    Price: $589.00

     

    • Description
    • Specifications
    • Downloads

    The TBL5016-1 50µH LISN is a device required to setup conducted noise measurements of DC or AC-powered electronic equipment. It is designed according to CISPR 16-1-2 and MIL-STD-461F standard and characterized in the frequency range of 9kHz to 100 MHz.

    Apart from carrying out conducted noise measurements, LISNs are also used to establish a defined impedance for various other standardized tests.

    The LISN is a 50Ω/50µH+5 Ω single line design with a high current jumper to short the 5 Ohm resistor and configure it as 50Ω/50µH LISN according to CISPR 16-1-2. The LISN is characterized up to 100 MHz which means that the LISN can be used for the combined range of 9 kHz to 100 MHz.

    The LISN is inserted into the supply line of the DUT (Device Under Test). Conducted noise, which is present at the supply terminals of the DUT can be measured at the BNC connector using a spectrum analyzer or a measurement receiver. The source (supply) terminal and the DUT terminal are decoupled by a 50µH inductor. DC or single phase measurements typically require a pair of TBL5016-1. Combining it with the Tekbox LISN Mate enables separate measurement of common mode and differential mode noise. DUTs with 3 phase supply require three or four pieces of TBL0516-1, depending on whether the product is supplied in delta or star configuration.

    The unit comes equipped with a BNC-male to N-male RG232 cable, mating connectors, high current configuration jumpers and ground brackets to attach it to a ground plane.




    Free UPS Ground Shipping On Orders Over $99

    Sign up for our newsletter containing updates and exclusive content!


    Customer Reviews

    Privacy Policy|Terms and Conditions|RoHs|Quality Statement|Returns|Sitemap

    © 2007- Saelig Company, Inc. All Rights Reserved.
    Other products, logos and company names mentioned herein, may be trademarks of their respective owners.
    eCommerce Shopping Cart Software by Miva Merchant