Teledyne LeCroy WaveSurfer 10M 1GHz Oscilloscope

The WaveSurfer 510 is now the leading instrument in this line, replacing the WaveSurfer 10 and WaveSurfer 10M models.  Although the WaveSurfer 10 and 10M have not been discontinued, WaveSurfer 510 offers better performance at a much lower price point, along with more triggers, math functions and measurement tools. 

1 GHz, 5 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4" Touch Screen Display. 10 GS/s, 20 Mpts Interleaved

The Teledyne LeCroy WaveSurfer 10M is a unique, powerful 1GHz 4-channel oscilloscope with a huge 10.4” touch screen display, high performance hardware, and compact form factor. The 10M Package adds the Advanced Debug Toolkit options, which adds:

10 GSa/s sampling on all 4 channels, 16 Mpoints/channel memory (32 interleaved), Sequence Mode Segmented Memory, History Mode Waveform Playback, 13 Additional Math Operators, 2 Math Functions. This all-inclusive powerful debug package enables the WaveSurfer 10 to perform advanced analysis on long captures with 10x oversampling to help quickly find the fundamental causes of puzzling problems

The “MAUI” user interface makes it super-easy and fast to use too! It also features advanced math, measurement and debug tools which allow you to analyze problems and debug circuits quickly.  

MAUI - A Touch Interface with a New Wave of Thinking

MAUI is a truly advanced oscilloscope user interface, specially designed for touch input.  All of the important oscilloscope controls can be accessed via the intuitive touch interface. MAUI has been designed for simplicity of use. Shortcuts and simple, intuitive dialogs make setup fast. MAUI helps solve problems quickly with its deep set of debug and analysis tools to  help identify issues and find solutions rapidly.

No-compromise Performance

Other 1 GHz oscilloscopes may be found at low entry-point prices, but they are always limited in sample rate, memory size, or features. And some are just plain unreliable. The WaveSurfer 10 is a quality made product that provides uncompromised 1 GHz performance with up to 10 GSa/s per channel and 32 Mpoints of memory.

Capture Debug, Analyze, Document

Easy-access measurements, math and debug tools, plus a wide variety of serial data protocol decoders, and active probes insure the WaveSurfer 10 can capture and analyze any type of waveform and simplify the debug process. The LabNotebook tool provides a fast way to save waveforms, save setups and screen images, report results, and view offline

Embedded Controller Design and Debug

Save valuable engineering time when working with embedded controllers by adding high-performance digital debug mixed signal capability with the WaveSurfer 10. Capture digital signals up to 250 MHz with up to 10 Mpoints/Channel memory, 1 GSa/s and 18 digital channels. In addition, the many extra triggering and decoding options turn the WaveSurfer 10 into an all-in-one analog, digital, and serial data trigger, acquisition, and debug device.

Serial Trigger and Decode Options

Debugging serial data busses can often be tricky and time consuming. But the serial data and decode options for WaveSurfer 10 provide time-saving tools for serial bus debug and validation.  Powerful serial data triggers, intuitive color-coded decode overlays, table summaries and search and zoom help with these tasks.

Supported Serial Data Protocols:

• I2C, SPI, UART
• CAN, LIN, FlexRay, SENT
• Ethernet 10/100BaseT, USB 1.0/1.1/2.0, USB2.0-HSIC
• Audio (I2S, LJ, RJ, TDM)
• MIL-STD-1553, ARINC 429
• MIPI D-PHY, DigRF 3G, DigRF v4
• Manchester, NRZ

Simple Frequency Domain Analysis with Spectrum Analyzer Mode

It’s often helpful to gain insight into the frequency content of a signal with use of a spectrum analyzer. This mode on the WaveSurfer 10 provides a spectrum analyzer user interface with controls for start/stop frequency or center frequency and span. The unique peak search capability automatically labels spectral components and presents frequency and level in an interactive table. Use the 20 markers to automatically identify harmonics and monitor how the spectrum changes over time via the spectrogram which can display a 2D or 3D history of frequency content.

 

Power Analyzer Automates Switching Device Loss Measurements

 

Quickly measure and analyze the operating characteristics of power conversion devices and circuits with the Power Analyzer (optional extra). Critical power switching device measurements, control loop modulation analysis, and line power harmonic testing are all made simple with a dedicated user interface and automatic measurements. Areas of turn-on, turn-off, and conduction loss are all identified with color-coded waveform overlays for fast analysis.