Siglent SHS1102 100MHz 2-ch Isolated Oscilloscope

The SHS1102 is a multifunction handheld 2-channel oscilloscope that also includes a full digital multimeter logger and a waveform recorder. Siglent’s patented Isolated Channel technology provides isolation from ground and between channels. With a signal bandwidth of 100MHz, this portable unit with a bright 5.7” color TFT LCD screen can measure at a real-time sample rate of 1GSa/s with a memory depth of 2Mpts, allowing storing, replaying and zooming in on measurements.

The oscilloscope features multiple trigger types (Edge, Pulse, Video, Slope and Alternative), a rise time of less than 5.8ns, vertical sensitivity of 5mV/div – 100V/div and 8 bit vertical resolution.  The built-in multimeter of the SHS1102 can also measure DC/AC voltage, DC/AC current, resistance, capacitance, diode and continuity in many ranges with a display count of 6000.  The SHS1102’s built in data-recorder has up to 18 hours recording time, while the Meter TrendPlot can record multimeter measurement data for as long as 6000 hours at 0.05Sa/s. 

Input voltage: input voltage through BNC is up to CATII 300V and CATIII 150V Standard probe: 10X CAT II 400V Optional probe: 10X CAT II 1000V and 10X CAT III 600V Oscilloscope and multimeter safety to CAT II 600V and CAT III 300V.

The SHS1102 offers 32 automatic measurements，3 cursor measure modes, 4 digital filters (low-pass, high-pass, band-pass, band-limit) as well as Math functions +, -, ×, ÷, and X/Y plots, as well as FFT frequency display.  Multiple trigger types include video signal settings.

It features USB device for software updates, and USB host capabilities for PictBridge-compatible printers. SHS1102 connects to a PC through a USB cable for EasyScope control software and can save/recall waveforms to USB Flash drive. SHS1062 can save 2 groups of reference waveforms, 20 groups of setups and 10 groups of waveforms in its internal memory, save setup data, waveform data, waveform interface image, and CSV file to an USB flash drive.

The SHS1102 comes with a rechargeable 7.4V 5000mAh Lithium battery pack which lasts up to 5 hours of continuous use, but a 100-240V 50/60Hz 9V 4A DC adapter is also provided.  Two 100MHz oscilloscope probes (1 x CAT II 1000V and 1 x CAT III 600V) are included too, as well as two test leads for multimeter measurements.