Cleverscope CS548 from SaeligSaelig Logo

 

 

 

NEW PRODUCT ANNOUNCEMENT
 FOR IMMEDIATE RELEASE
: October 12, 2022
Contact:
   Alan Lowne, CEO, Saelig Company Inc.  
(585) 385-1750     [email protected]


Saelig Announces Improved Isolated High Voltage 4-Ch 200MHz Oscilloscope
The CS548 is a unique isolated four-channel 200MHz 14-bit oscilloscope designed to measure high voltage, fast slew-rate signals such as those in a full or three-phase power electronic switching bridge.


Fairport, NY:  Saelig Company, Inc. has announced the Cleverscope CS548 Oscilloscope, a 2kV DC isolated channel oscilloscope designed to be used wherever isolation and high CMRR are needed. It improves on the previous and very successful CS448 for power electronics and high side test measurements.  The CS548 is an individually isolated channel high CMRR oscilloscope with four channels that has been designed for measurements in situations such as an operating full or three-phase power electronic switching bridge on both the low and high sides. The CS548 takes 14-bit measurements with isolated channel 2kV DC Class III capture, and 100 dB CMRR at 50 MHz. The instrument offers frequency response analysis using an internal isolated signal generator, component LCR measurement, multiple-hour streaming to disk at >2MSa/s, high resolution spectrum displays, sophisticated math, with Matlab and Excel live compatibility and added mixed signal features.  The optional remote isolated digitizer CS1200 IsoPod connects to the CS548 by fiber link at up to 30yds for use in high voltage enclosures to provide 30kV isolation.

  The CS548 package includes:

Optional Pods:

These pods are in development:

The CS548 can be used to make measurements of all high side nodes, do EMC measurements, check out start up behavior, calculate power loss and switching energy, and examine message contents.  Use it for stability analysis and gain/phase on working power electronics modules, impedance measurement of power planes, inputs and outputs, and measurement of inductors and capacitors over frequency.  Application examples include gate drives to measure voltage and charge, the power switch to measure loss and parasitic stress, the output to measure power and spectrum for EMC compliance, and the control system for Gain/Phase and stability.  It can be used to make measurements of all high side nodes, do EMC measurements, check out start up behavior, calculate power loss and switching energy, and examine message contents. 

Compact in size (11.8” x 7.5” x 2.8”) and weight (5.9lb) the CS548 is made in New Zealand by Cleverscope, an innovative test equipment manufacturer, and is available now from Saelig Company, Inc. Fairport NY. 1-888-7SAELIG  [email protected]  www.saelig.com.

 


High-res Image

Order on-line HERE