• Siglent SDS1000X-E
  • PicoScope 6000E
  • Micsig
  • Rigol RSA5000
  • Rigol Promotions
  • SDM3000
  • Not Your Average Web Store
  • Saelig Newsletter Signup
  • LD400
  • Saelig Name Origins
  • Sensepeek
  • Your Technical Distributor
  • ChargeBox
  • Teledyne LeCroy Wavesurfer 4000HD Promo
  • YouTube Videos
  • MegiQ
  • Saelig Scope Selection
  • Choosing An Oscilloscope
  • Free Shipping
  • Siglent EMI Promo
  • Cambrionix
  • ABI Electronics
  • Saelig-Kerr
  • Disklabs
  • ThinkRF
  • Rigol MSO
  • SAF Tehnika
  • Saelig Values
  • HT Instruments
  • JRE Test
  • Preen
  • PS4000A
  • Saelig 35 Years in business!
  • Teledyne LeCroy Wavesurfer 3000z Promo
  • Siglent SSA3000X-R
  • Tekbox
  • Windfreak
  • Rigol MSO5152-E
  • Teledyne LeCroy Free Products
  • GL Optic

Triarchy USB Mini Spectrum Analyzer TSAxG1 Series

    Triarchy USB Mini Spectrum Analyzer TSAxG1 Series

    Manufacturer: Triarchy Technologies

    From $518


    Frequency Range 1MHz to 4.15GHz

    1MHz to 5.35GHz,

    Band2: 5.35GHz to 6.15GHz

    1MHz to 5.35GHz,

    Band2: 5.35GHz to 8.15GHz

    Frequency Spans 1MHz to 1000 MHz
    Input Level Range -110 dBm to +30 dBm
    Dimensions 87.5mm x 23mm x 15mm (L x W x H)

    • Description
    • Downloads

    The TSA Range of Spectrum Analyzers are economical USB-stick-sized miniature RF tools with large instrument performance. These PC-connected devices can perform most of the basic tests of much more expensive bench-top spectrum analyzers. Though tiny, the TSA Range of Spectrum Analyzers covers a wide measurement range in three models: TSA4G1 (1MHz - 4.15GHz), TSA6G1 (1MHz - 6.15GHz), and TSA8G1 (1MHz - 8.15GHz).  They accept signal levels into standard SMA input connectors from - 110 dBm to +30 dBm (input power up to 1 W) and feature a noise level as low as -110 dBm. Test data is displayed on the attached PC using the supplied software, with calibrated level, linearity and frequency.

    A useful ‘remote’ feature allows the PC-connected USB-powered analyzers to be controlled remotely from anywhere via the Internet, allowing for the creation of an easy-setup remote RF monitoring system.  Frequency stability is +/- 5ppm and the minimum scanning step is 2kHz at 1MHz span.  Resolution bandwidths can be set to 50kHz, 100kHz, 200kHz, or 500kHz.  Scanning over the whole frequency range is 0.2s for ‘fast-scan’, and 2.3s for normal scan.

    Signal processing is performed with the free downloadable PC-based software.  Once the device’s parameters are set (center frequency and span, markers - peak, minimum or arbitrary, max hold, amplitude and reference level, sweep time and number of screen captures), the analyzer immediately commences a frequency sweep on pressing the “Start” button. The resolution bandwidth is automatically selected based on the span.  

    No larger than a pack of chewing gum, the TSA Range of Spectrum Analyzers are nevertheless sufficient for rapid EMC analysis and for troubleshooting RF signals in wireless remotes, cordless phones, wireless monitors, ATE systems and radios, Bluetooth, WiFi, WiMax and other wireless applications, for field service, installation, and education.  Accurate and stable in frequency, they can be used for EMC pre-compliance testing with the optional inexpensive near-field probe set TNP6Gx. This probe set includes two magnetic (H) field and two electric field probes, designed for resolving emissions problems. 

    Supplied complete with a 60” USB extension cable, a software CD, and a fixed 30 dB attenuator for higher power measurements, the compact (87.5mm x 23mm x 15mm) and extremely light weight (20g) TSA Range of Spectrum Analyzers are ideal for field test and servicing requirements since they are so convenient to add to a laptop bag.   

    Customer Quote: Ive been using the Triarchy TSA4G1 USB Mini Spectrum Analyzer with field portable satellite terminals that utilize L-Band IFs in the range of 950-2000 MHz. As part of troubleshooting, it is sometimes useful to intercept system cabling and verify the system is transmitting the appropriate CW or OQPSK modulated signal or has reference signals multiplexed on the interconnects. It is also useful for signal identification on the receive side. It is a great diagnostic tool to have and a nice size and weight trade-off from more expensive instrumentation when modest indication of basic function is what is needed. J.S. Rochester, NY


    • FM radio
    • Two way radio
    • TV application
    • Remote controller
    • Cellular and PCS, CDMA and GSM, GPRS, Edge,WCDMA and 3G, LTE.
    • 915MHz, 2.4G ISM band application, 5.8G ISM band application (TSA6G1 and TSA8G1 models only)
    • Bluetooth
    • WiFi
    • WiMax
    • Field test and installation
    • ATE system
    • Near field testing and EMC

    Customers who purchased this product, also purchased...

    Free UPS Ground Shipping On Orders Over $99

    Sign up for our newsletter containing updates and exclusive content!

    Customer Reviews

    Privacy Policy|Terms and Conditions|RoHs|Quality Statement|Returns|Sitemap

    © 2007- Saelig Company, Inc. All Rights Reserved.
    Other products, logos and company names mentioned herein, may be trademarks of their respective owners.
    eCommerce Shopping Cart Software by Miva Merchant