>
KSR2.4 2.4GHz 6-Output Command UnitManufacturer: Circuit Design Request a Quote
The KST2.4S and KSR2.4 allow the wireless transmission of up to 6 switching signals. A DC supply voltage of 6 to 24 V can be used for operation. By incorporating CRC-16 error detection, a Hamming distance of 6 can be achieved to minimise any malfunctions. The communication mode is 1:1 only and neither 1:N nor N:1 is possible. The switch between transmit and receive rapidly allows two way communication between input and output modules to constantly monitor the communication link status. By monitoring the link status from the unit, this will help the user stay within the signal coverage area. Frequency hopping minimizes interference from other nearby radio systems on the 2.4 GHz band. There is no need to manage any channels and multiple system operation in the same area is possible. Output mode of KSR2.4 selectable from momentary, toggle and one-shot. Response time of 70 ms or below with line of sight communication of 100 m. Incorporating NK-2.4Y with FCC (US) and MIC(Japan) certified. Operation in US and Japan possible. *Connector with harness (500 mm) included. Antenna sold separately. Select ANT-2G4W1R-R(ANT-2400-SF) or ANT-2400SFW. *Communication range, number of units usable in one area are for reference only. Due to the installation environment, actual values will change. Applications
You Might Also Be Interested In...
|
|
