MFG-2260MRA 2-Ch 60MHz AFG w/ Pulse / 320MHz RF Sig Gen / PA

The MFG-2260MRA is a 60MHz Dual-Channel Arbitrary Function Generator with a built-in 25MHz Pulse Generator, and a Modulation/Sweep/Burst channel that features a 150MHz Frequency Counter, a 320MHz RF signal generator, and a 100kHz 20dB Power Amplifier. The front panel’s clear large 4.3” TFT color display allows waveforms to be selected, edited, stored, recalled, output, and triggered from a selection of 66 built-in waveforms.

GWInstek’s MFG-2260MRA Multi-channel Function Generator features five isolated functional channels.  Users can easily and quickly edit arbitrary waveforms for use with the function generator using the PC software provided.  And waveforms captured GWInstek’s GDS digital oscilloscopes can be uploaded to faithfully reproduce signals monitored by the scope.  With the multi-functionality channels, the MFG-2260MRA provides special dual channel waveforms such as IQ modulation signals, low-frequency vibration simulation, automotive sensors, AM/FM broadcast signals, PWM motor or fan control signals, pulse synchronized signals, pulse noise, audio signal simulation, etc.

The MFG-2260MRA supports useful frequency and amplitude sweeps such as linear/logarithmic, one-way (saw tooth)/two-way (triangle), and others that are valuable for performing frequency response tests on circuits and components. The tracking function can produce 180 degree phase offset differential signals with same frequency and amplitude. The phase function allows users to freely set phase parameters for both channels on sine wave, cosine wave, and square wave signals. The sum modulation function can combine two signals into one and output this signal via one channel, such as adding a sine waveform and a noise signal to perform speaker distortion tests.

The MFG-2260MRA function generator is ideal for scientific research, education, R&D, production, and quality control, and many other applications where a high quality signal source is required.