PVCHECKs-PRO Commissioning tester for PV system
Multifunction commissioning tester up to 1500V / 40A capable of taking the following measurements:
• Insulation measurement on PV modules/strings/fields up to 1500VDC (with PI and DAR calculation)
• Open circuit voltage Voc up to 1500V in accordance with IEC/EN62446
• Short circuit current Isc up to 40A in accordance with IEC/EN62446
• Continuity of protective conductors with 200mA
• Polarity
• GFL function for fault finding on strings and PV modules
• Tests on single-facial and bi-facial modules
PVCHECKs-PRO is a commissioning tester designed to take all safety measurements and verifications of PV installations in accordance with IEC/EN62446. By a single GO-key stroke PVCHECKs-PRO performs all commissioning tests. Thanks to the seamless mode, PVCHECKs-PRO is able to test in sequence all strings of a combiner box by a single GO-key stroke. Finally, the GFL - Ground Fault Locator detects the precise position of the lack of insulation, speeding the troubleshooting.
ACCESSORIES
HT305 REFERENCE CELL FOR IRRADIATION MEASUREMENT
- Measuring range: 100 ÷ 1400W/m2
- Basic accuracy: ±3.0% reading
- Type of cell: Monocrystalline
- FOV angle: >160°
- IP rating: IP65 according to IEC/EN60529
- Output connector: custom 5-pin HT connector
- Connection cable: approx. 2m
- Dimensions (WxDxH): 111x85x28mm
- Weight: 240g
- Internally stored calibration parameters
PT305 PT1000 probe for cell temperature measurement
SOLAR03 REMOTE UNIT FOR MEASUREMENT OF IRRADIANCE, TEMPERATURE AND INCLINATION OF PV MODULES
- Measurement range: 0÷1400W/m2
- Basic Accuracy: ± 1.0%rdg
- Type of PV modules: Single-sided and Double-sided
- Measurements: Irradiance (with HT305 cell) and module temperature (with PT305 probe)
- Recording: irradiation and temperature values coupled with Master unit
- Internal memory: about 60 hours (@ fixed PI =1s)
- Degree of protection: IP67
- Dimensions: 155x100x55mm
- Weight: 350g (including batteries)
- Power supply: 2 1.5V AA-type alkaline batteries or 1.2V AA-type NiMH rechargeable batteries
- Master unit connection: Bluetooth BLE
- Output connection: USB-C for battery charging
- Input connectors: custom HT 5 poles
- Automatic acquisition of the cell calibration value (by using suitable cells)
>
