HT Instruments COMBIG2 Multifunction Tester w/ Touchscreen and WiFi

The COMBIG2 is a multifunction installation tester with color touchscreen display and WiFi compatible with HTANALYSIS™

• All verifications of electric safety provided for by standards IEC/EN61557-1.
• Advanced Loop Verification of magnetothermal protections, fuses and cable sizes.
• Measurement of electric parameters insingle- phase installations (V,I, W, VAR, VA, PF).
• Test of RCDs type A, AC, B up to 1A, also with separate clamp jaws with test current up to 10A (with optional accessory RCDX10).
• Measurement of insulation resistance.
• Measurement of continuity of protection conductors.
• Verification of phase sequence (SEQ) and leakage currents.
• Measurement of environmental paramemeters with external probes.

It is used for checking the safety of private and industrial electric systems (IEC/ EN61557-1). Thanks to its building characteristics, the type of setting and the multiple applications as regards the documentation it is capable of producing, this device can satisfy even the most demanding technician and the most rigorous verifier. Its TFT color display with capacitive touch-screen allows using this device in a completely new manner. COMBIG2 makes available on its display all possible variables to obtain a perfect measurement; your task will only be to “touch” what you really want to measure: then, simply leave the rest to COMBIG2’s micro-processor! The device complies with all requirements as regards the safety of electric systems: test of RCDs type A, AC also up to 1000 mA and type B; insulation, continuity, earth resistance tests directly on the power outlet without causing the RCDs’ tripping.

With the appropriate programming guided by the touch-screen system, this device can test the interruption power, tripping currents, I2t relevant to magneto-thermal switches (MCB) with curves B, C, D, K and fuses type gG and aM! Combined with optional clamp HT96U it is capable to carry out and record measurements of leakage current, power, cosphi, harmonics, THD% and frequency. This device has been devised for use together with optional accessories which widen its operating fields: e.g. HT53/05 for measuring lux, HT52/05 for measuring temperature and humidity and RCDX10 for testing RCDs with separate jaws up to 10A. Cutting-edge management of measurement with indication, at the end of each safety test, of compliance or non-compliance with requirements with simple symbols OK o NOT OK.

Finally, thanks to the brand new HTAnalysis App, free to download for iOS and Android systems, COMBIG2 is capable of transferring measured and recorded data onto tablets and smartphones, thus giving the operator the possibility to customize and share through HtCloud the result of their tests.