DPG10-100B Power Choke Tester

This version has been developed especially for inductors with lower saturation current. The three measurement ranges are divided in 0.1 – 1.0 Amps, 1.1 – 10.0 Amps and 10.1 – 100.0 Amps. The measuring current is adjustable in steps of 0.1 Amps.

Additionally the resistance measurement was resized and covers a testing range of up to 35 Ohms (however the inductance curve of test specimen with higher ohmic resistance can be measured also if resistance value is entered manual).

The advantage of this version is the ability to measure chokes with smaller saturation current down to some 10 milliamps such as current compensated chokes for PCB mounting and/or coils with high fraction of the ohmic part such as

• Solenoids
• Solenoid valves
• Eddy current brakes
• and many others