Cleverscope CS700 Signal Generator

The CS700 Signal Generator is a plug-in module for the CS328 and CS320 Oscilloscopes. If you order the CS700 at the same time as a CS328 or CS320, the module will be factory or dealer fitted. Otherwise you are able to fit the module yourself.

The CS700 Signal generator generates sine, square and triangle output waveforms. The amplitude may be varied between 0 and 5V pk-pk, in 10mV steps. The offset maybe varied from "4 to +4V in 10 mV steps. The generator can be FSK and PSK modulated, and Frequency swept. The sweep may be synchronized with the Spectrum Analyzer to carry out transfer response measurement. Two of the digital inputs may be allocated to switch between either of the two frequencies or two phases.