FT245RL 28-Pin SSOP Pkg

Manufacturer: FTDI

This product is no longer available at Saelig.

Description
Features
Specifications
Downloads

Single chip USB to parallel FIFO bidirectional data transfer interface
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
Simple interface to MCU / PLD / FPGA logic with simple 4-wire handshake interface.
Data transfer rate to 1 Megabyte / second - D2XX Direct Drivers.
Data transfer rate to 300 kilobyte / second - VCP Drivers.
256 byte receive buffer and 128 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
FTDI\'s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
New USB FTDIChip-ID™ feature.
FIFO receive and transmit buffers for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes allow the data bus to be used as a general purpose I/O port.
Integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings.
Device supplied preprogrammed with unique USB serial number.
Support for USB suspend / resume through PWREN# pin and Wake Up pin function.
In-built support for event characters.
Support for bus powered, self powered, and high-power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on FIFO interface and control pins for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
USB bulk transfer mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).1. Features 1.1 Hardware

Customers who purchased this product, also purchased...

TimingDesigner Static Timing Analysis Software

Price: $0.00

FT245RL 28-Pin SSOP Pkg

This product is no longer available at Saelig.

Reviews

Customers who purchased this product, also purchased...