Automotive Ethernet Converter

The x2e Automotive Ethernet Converter has been designed primarily to convert Ethernet signals from a vehicle’s ECU for connecting to a PC or data logger, but it can also be used for any other industrial application where this conversion is needed. The device converts data between 100/1000Base-T1 (OPEN Alliance BroadR-Reach®) and 100/1000Base-T (standard Ethernet).

In addition, the Automotive Ethernet Converter provides the functionality of a high-speed CAN transceiver. If there is no activity on the connected CAN bus, the device can optionally enter a configurable sleep mode to reduce power consumption, and wake up with resumed CAN bus activity.  

Basic configuration setup is via DIP switch selection, with LEDs providing information about the active status of the converter and the connected interfaces. 

Supplied in a rugged 4.1” x 2.2” x 0.83” aluminum enclosure and powered from 6 V to 28 V, the converter’s maximum current consumption at 12V is 150mA, with a standby maximum of 1mA.