IO-Warrior28 Eval Kit (IOW28EVAL)

The IOW28 EvalKit has a form factor that allows to put it on a DIL28 (wide) socket or onto a breadboard. Pins are not supplied.

A two pin and a three pin header and jumpers are provided that need to be soldered into the board. The three pin jumper allows to set the power, placing the jumper next to the USB plug selects low power. With the two pin jumper a LED can be connected to P2.0 for testing. The button connects to P2.1 and pulls to ground. LED and button are intended for simple testing of the I/O operations. The power supply layout on the EvalKit has been carefully designed to allow good performance of the A/D converter.