PICO Connector Breakout Lead Kit B (PQ030)

The Pico connector breakout leads enable you to take voltage readings from numerous sensors and actuators around the engine. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the 4 mm banana plugs to the automotive oscilloscope using one of the TA125 to TA128 premium test leads.

The breakout cable gives access to the individual wires to allow probing with current clamps, allowing, for example, both injector current and injector voltage to be captured.

Please note: the test lead is required to convert the 4 mm banana plug connection on the connector breakout leads to a BNC connector suitable for plugging into the PicoScope.