>
PicoScope 6403E 300MHz 8-bit 4-Ch Oscilloscope (PQ206)Manufacturer: Pico Technology This product is superseded by the PicoScope 6403E (PQ199) Purchase of Calibration Certificate [p/n CC051] requires factory calibration. Please contact Saelig for lead-time. For recalibration of an existing unit, please contact Saelig at 888-772-3544.
The 4-channel PicoScope 6403E 300MHz Oscilloscope provides 8 bits of vertical resolution, and up to 5GSa/s sampling rate with 1GSa memory. This gives it the ability to display single-shot pulses with 200ps time resolution. The screen update rate is a remarkable 300,000 waveforms per second. It can also operate with an extra 4 bits of resolution with the enhanced vertical resolution software feature — a digital signal processing technique built into the free PicoScope 6 software. Additionally, this oscilloscope offers 8 or 16 optional digital channels when using the plug-in TA369 MSO pods, enabling accurate time-correlation of analog and digital channels. All 6000E models include a 14-bit 200MS/s 50MHz arbitrary waveform generator (AWG). Its variable sample clock avoids the jitter on waveform edges seen with fixed-clock generators and allows generation of accurate frequencies down to 100μHz. AWG waveforms can be created or edited using the built-in editor, imported from oscilloscope traces, loaded from a spreadsheet or exported to a .csv file. The SuperSpeed USB 3.0 interface and hardware acceleration ensure that the display is smooth and responsive even with long captures. The free PicoScope 6 software includes decoders for over 20 serial protocols. The 6403E’s 4 analog channels have the timing and amplitude resolution needed to reveal signal integrity challenges such as glitches, runts, dropouts, noise, distortion and ringing. The compact design of the PicoScope 6000E (9.7 x 7.6 x 2.5 inches) means that it fits easily on any workbench, whether in the laboratory or at home. This series gives the waveform memory, resolution and analysis tools needed to test today’s high performance embedded computers and next-generation embedded system designs. The 6000E oscilloscopes are ideal for design engineers working with signal processing, power electronics, mechatronics, and automotive designs, and for researchers and scientists working on multi-channel high-performance experiments in physics labs, particle accelerators, and similar facilities. Supported by the PicoScope 6 software, these devices offer an ideal, cost-effective package for design, research, test, education, service, and repair.
|
