PICO 500MHz Passive Probe (TA133)

Passive oscilloscope probe: 500 MHz 2.5 mm high-impedance 10:1,  BNC

Pico\'s ergonomically designed passive oscilloscope probes are suitable for use with all major brands of oscilloscopes as well as the PicoScope range of USB Oscilloscopes. Passive probes don\'t require a power supply or batteries so are lightweight and easily portable.

The TA133 is a high-impedance passive probe with 500 MHz bandwidth. It is designed for use with oscilloscopes with a 1 MΩ input impedance and has a fixed attenuation of 10:1. The TA133 has been compensated to ensure optimal performance with the PicoScope 6404 oscilloscopes.

The compact design of this high-performance probe means there is only 2.5 mm housing diameter at the probe tip compared to the conventional 5 mm housing, making it easier to see the device under test and making it ideal for measurements of SMT components.

Each TA133 probe is supplied with the following accessories and spares:

• 1 x Coding rings (set) 3x4 colours
• 1 x Ground blade 2.5
• 1 x Ground lead 15 cm
• 1 x Ground spring 2.5
• 1 x IC-Cap 2.5 0.5 mm pitch; green
• 1 x IC-Cap 2.5 0.65 mm pitch; blue
• 1 x IC Cap 2.5 0.8 mm pitch; grey
• 1 x IC Cap 2.5 1.0 mm pitch; brown
• 1 x IC Cap 2.5 1.27 mm pitch; black
• 1 x Insulating cap
• 2 x Self-adhesive Cu pad 2 x 2 cm
• 1 x Solid tip CuBe 0.5 mm
• 1 x Spring tip gold plated 0.5 mm
• 1 x Sprung hook
• 1 x Trim tool
• 1 x PCB adaptor kit