TekBox TBOH01-Set

This set is ideal for testing of conducted electromagnetic interference generated by devices with DC power supply, eg. As for the protection of potential recipients on board vehicles CISPR 25th

The DUT (device under test) should be located on an isolated ground on the reference ground plane. The spectrum analyzer to measure the conducted noise spectrum on both supply lines. The RF output of each unused LISN must be terminated with 50 ohms.

The exact details of the construction and the limit values ​​for conducted interference, see the CISPR 25 and relevant for the application of standardization works.

The set includes:

• TekBox 2x TBOH01 / 5 .mu.H DC LISN to 10 A
• TekBox NM-BNCM / 75 / RG58 / coaxial cable (RG58), N-male <> BNC connector, 75cm
• TekBox TBT BNC / 50 Ohm-2W / BNC termination resistor of 50 Ohm, 2W