Limited quantities.
PicoLog 1216 and PicoLog 1012 multichannel voltage data loggers
PicoLog 1216:
- 16 unipolar analog input channels
- 12-bit resolution for 0.5% accuracy
- 4 software configurable digital output lines
- 1 PWM control output
PicoLog 1012:
- 12 unipolar analog input channels
- 10-bit resolution for 1% accuracy
- 2 software configurable digital output lines
Shared features:
- Up to 1 MS/s sample rate
- USB connected and powered
- Software and pin compatible with Pico USB ADC-11
- Current-limited sensor excitation output
- Works with Windows XP and Vista (32 and 64-bit)
- Includes API and examples for C/C++/C#, VB, LabVIEW VIs
- Complete with terminal board and ready-to-go data logging software
Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1216 and 1012 feature independent software-configurable channels, ranges, scaling and control outputs, an external terminal board for custom front-end circuitry and a choice of 10 or 12-bit input resolution.
The PicoLog 1216 and 1012 voltage data loggers contain everything needed for immediate use and are complemented by a full suite of software including the PicoLog data logging package, the PicoScope oscilloscope package and an SDK for writing user programs.
Both loggers feature 3 sampling modes to meet most data logging needs: real-time continuous, streaming and block mode. Streaming allows channel voltage readings to be logged continuously at 1 kS/s on any number of channels, while real-time continuous provides averaged, time-accurate readings with automatic measurements available in PicoLog. Block mode captures at the full 1 MS/s sample rate of the logger for the duration of the 8k sample buffer.
| Attribute | PicoLog 1216 | PicoLog 1012 |
| Input channels | 16 channels | 12 channels |
| Resolution (bits) | 12 bits | 10 bits |
| Sampling rate –streaming | 1 kS/s per channel in PicoLog, 100 kS/s using API |
| Sampling rate - block mode | 1 MS/s |
| Sample rate – real-time continuous | 1 kS/s or greater |
| Buffer memory | 8k samples shared by all channels |
| Input Type (single/diff) | Single-ended, unipolar |
| Voltage Ranges | 0 - 2.5V |
| Accuracy | 0.5% @ 12 bits | 1.0% @ 10 bits |
| Overload protection | ±30 V |
| AC/DC coupling | DC coupling |
| Input Impedance | 1M¿ fixed – buffered inputs |
| Digital Outputs | 4 digital outputs | 2 digital outputs |
| Output power for sensors | 2.5 V @ 10 mA. Current limited. |
| Other outputs | PWM output (controllable in PicoScope 6). | None |
| Power requirements | Powered from USB port, <200 mA operating, <100 mA on startup |
| PC connectivity | USB 2.0 full speed |
| Input/output connector | 25-way D Type, Female (pin-compatible with USB ADC-11) |
| Dimensions | 45 x 100 x 140 mm |
| Compliance | CE (EMC) Class A emissions & immunity. FCC emissions. |
>
