GW Instek GDS-1104B 100MHz 4-Ch Digital OscilloscopeManufacturer: GW Instek Price: $725.00
The GDS-1104B 4-channel 100MHz Digital Oscilloscope is an innovative scope with a maximum sampling rate 1GSa/s and 10Mpts memory for each channel. The 7" WVGA color LCD display updates at 50,000wfms/s – and the display 256 color gradient capability helps in signal discrimination. The FFT capability shows signal frequency spectra – helpful especially when debugging circuit problems or characterizing filters. Multiple trigger functions, X-Y mode analysis, and Go/NoGo capability means that the GDS-1000B series oscilloscopes compete with higher level products. The GDS-1104B’s OpenWave connection software allows waveform observation, data storage and control from a remote PC. The GDS-1000B range of oscilloscopes all have a data-logging function option for observing and recordings over a long time period. This can be set by data storage time or interval based on the test requirements. Recording time can be adjusted from 5 minutes to 100 hours, at intervals as short as 5 seconds. Data log formats include waveform and point data in CSV file and can be saved to USB, on the GDS-1000B itself, or on a remote computer via LAN. The GDS-1000B Series Oscilloscope have 36 different automatic measurements - eight sets of different measurement parameters can be seen simultaneously at the bottom of the display. You can also elect to show all 36 parameters if desired. This is a very convenient measurement tool for preparing engineering reports, and student projects. |
