SGR510/520 Torque Transducer

The TorqSense Digital rotary strain gauge series (SGR) Transducers use non contact technology eliminating the need for noisy slip rings. The SGR510/520 series torque sensors are suitable for torque measuring, testing, feedback control of drive mechanisms and process control applications.

The SGR series transducers use modern strain gauge signal conditioning techniques to provide a high bandwidth low cost torque measuring solution with high overrange and overload capabilities.  If you require separate electronics, please see our SGR530/540 Series transducers.

TorqSense SGR510 Series transducers offer:

• Fixed voltage or current analog outputs (one for torque and the other for speed or power) for interfacing with analog instrumentation
• BIT Self-diagnostics for letting the manufacturer know that the transducers torque, speed ratings and calibration due date have not been exceeded
• Simple ‘Sensor status’ output pin
• Sensors to monitor shaft temperature for better compensation and accuracy

Whereas, TorqSense SGR520 Series transducers offer:

• Digital outputs such as RS232, CANbus and USB for interfacing with modern instrumentation and laptops
• Digital input for configuring transducer via PC
• 2 x user selectable voltage or current analog outputs (one for torque and the other for speed, power or peak torque) for interfacing with analog instrumentation
• Transducer configuration software to allow user to change transducer variables
• BIT Self-diagnostics for letting users know data is trustworthy, that the transducers torque, speed ratings and calibrated due date have not been exceeded
• Simple ‘Sensor status’ output pin
• Sensors to monitor shaft temperature for better compensation and accuracy
• Ability to connect up to 10 transducers using USB
• Optional external ethernet gateway module

Ethernet Module	ETD Display	TorqView Software	Bluetooth Interface	Signal Breakout Unit
The Ethernet Interface Module connects our range of Torque Transducers to a Local Area Network.	The Transducer Display ETD is a readout which displays values of torque, peak torque, speed and power.	TorqView is an easy to use Advanced Torque Monitoring software for use with our rotary torque sensors.	Bluetooth adds wireless flexibility to your torque sensors. The box plugs into the 15 way ‘D’ digital lead connector.	The Transducer Signal Breakout Unit breaks out signals from any SGR, RWT or ORT series torque transducer.

 Visit this manufacturer\'s website here