PicoScope 9301-25 2-Ch 25GHz Sampling Scope (PQ094)

The PicoScope 9300 Series oscilloscopes use triggered sequential sampling to capture high-bandwidth repetitive or clock-derived signals without the expense or jitter of a very high-speed clocked sampling system such as a real-time oscilloscope. The 20 GHz bandwidth allows measurement of 17.5 ps transitions, while the very low sampling jitter enables a time resolution as short as 0.064 ps. The sequential sampling rate of 1 MS/s, unsurpassed by any other sampling oscilloscope, allows the fast building of waveforms, eye diagrams and histograms.

These units occupy very little space on your workbench and are small enough to carry with your laptop for on-site testing, but that’s not all. Instead of using remote probe heads attached to a large bench-top unit, you can now position the scope right next to the device under test. Now all that lies between your scope and the DUT is a short, low-loss coaxial cable!

Everything you need is built into the oscilloscope, with no expensive hardware or software add-ons to worry about.